Novel Bi2WO6-BiPO4 photocatalysts with heterojunction structure were fabricated through a facile hydrothermal route. The photocatalytic properties of Bi2WO6-BiPO4 composites were evaluated by photocatalytic degradation of rhodamine B （Rh B） under simulated sunlight irradiation. The results showed that Bi2WO6-BiPO4 photocatalysts displayed much higher photocatalytic performances for Rh B degradation than the single BiPO4 and Bi2WO6. The best photocatalytic activity of Bi2WO6-BiPO4 with nearly 100% Rh B degradation located at molar ratio of 1：1 after 20 min irradiation. The enhanced photo-catalytic performance could be mainly ascribed to the formation of heterojunction interface in Bi2WO6-BiPO4 which facilitated the transfer and separation of photogenerated electron-hole pairs, as well as the strong visible light absorption originating from the sensitization role of Bi2WO6 to BiPO4. It was also found that the photodegradation of Rh B molecules was mainly attributed to the oxidation action of the generated O2^· - radicals and partly to the action of hvb^＋ via direct hole oxidation process.
In this work, InVO4 hierarchical microspheres and InVO4 nanowires were successfully synthesized by a facile hydrothermal method. Field emission scanning electron microscopy showed that InVO4 crystals can be fabricated in different morphologies by simply manipulating the reuction parameters of hydrothermal process. The as-prepared InVO4 photocatalysts exhibited higher photocatalytic activities in the degradation of rhodamine B under visible-light irradiation （λ〉420 nm） compared with commercial P25 TiO2. Furthermore, the as-synthesized InVO4 hierarchical microspheres showed higher photocatalytic activity than that of InVO4 nanowires. Up to 100% Rh B （3 μmol/L） was decolorized after visible-light irradiation for 40 min. In addition, the reason for the difference in the photocatalytic activities for InVO4 hierarchical microspheres and InVO4 nanowires was studied based on their structures and morphologies.
