In the caprolactam production process,ammonium sulfate grains inevitably entrain a small amount of amide oil,when the grains settle and separate in the gas-liquid-liquid-solid crystallization reactor.Amide oil entrainment causes waste of caprolactam and pollution of ammonium sulfate.By adding surfactants and changing experimental conditions,the entrainment of amide oil was reduced.The influence of surfactant,pH,temperature,and grain size on adsorption behavior of amide oil on the surface of ammonium sulfate crystal was evaluated from the adsorption equilibrium under shaking.The results show that cationic surfactant cetylpyridinium bromide(CPB),dodecyltrimethylammonium bromide(DTAB),non-ionic surfactant Tween 80,and the mixture of non-ionic surfactant Triton X-100 and DTAB reduce the caprolactam adsorption on the surface of ammonium sulfate crystals,while anionic surfactant sodium lauryl sulfate(SDS)and sodium dodecyl benzene sulfonate(SDBS)increase the caprolactam adsorption.In the range of 2—7,pH does not significantly affect the adsorption behavior.Between 50—80℃,amide oil adsorption on the surface of ammonium sulfate increases with temperature.With increasing ammonium sulfate particle size,the adsorption of amide oil decreases.
Abstract A new mixer-settler-mixer three chamber integrated extractor is proposed in this work for liquid-liquid- liquid three phase countercurrent and continuous extraction. Experiments revealed the influences of the structural design of the three-liquid-phase extractor and some key operational parameters on three-phase partition of two phenolic isomers, p-nitrophenol （p-NP） and o-nitrophenol （o-NP）. The model three-liquid-phase extraction system used here is nonane （organic top-plaase）-polyethylene glycol （PEG 20UU） （polymer mlddle-phase）-（NH4）2SO4 aqueous solution （aqueous bottom-phase）. It is indicated that agitating speed and retention time in three-phase mixer are key parameters to extraction fraction of nitrophenol. Dispersion band behavior is related to agitating intensity, and its occurrence does not affect the extraction fraction of target compounds. The present work highlights the possibility of a feasible approach of scaling up of the proposed three-phase extraction apparatus for future in- dustrial-aimed applications.
The magnetic poly-（methacrylate-divinyl benzene） microspheres with micron size were synthesized by modified suspension polymerization method. Adsorption of Cr（VI） from aqueous solution by magnetic poly-（MA-DVB） microspheres with surface amination was investigated. The adsorption processes were carried out under diversified conditions of pH value, adsorption time and temperature to evaluate the perlbrmance of the magnetic microspheres. The optimum pH value for Cr（VI） adsorption was found as 3. The adsorption capacity increased with adsorption time and attained an optimum at 60 rain. The adsorption processes for magnetic microspheres was endothermic reaction, and the adsorption capacity increased with increasing temperature.
