Based on the urgency of thermal hazard control in deep coal mines,we studied the status of deep thermal damage and cooling technology both at home and abroad,summarized the causes of deep thermal hazard,analysed and compared the control technologies for deep thermal hazards.The results show that the causes of deep thermal damage can be attributed to three aspects,i.e.,climate,geological and mining factors,of which the geological factors are deemed the major reasons for thermal hazards.As well,we compared a number of cooling technologies of domestic and overseas provenance,such as central air conditioning cooling technology,ice cooling technology and water cooling technology,with one other cooling technology,i.e.,the HEMS cooling technology,which has a large and important effect with its unique＂pure air＂cooling technology,realizes the utilizing of heat resources from underground to the ground.This technology makes use of heat obtained underground;thus the technology can promote low-carbon environmental economic development in coal mines,in order to achieve low- carbon coal production in China.
Yang XiaojieHan QiaoyunPang JiewenShi XiaoweiHou DingguiLiu Chao
Puhe Coal Mine is a typical Tertiary coal in Shenbei mining area. With an increase in mining depth, tectonic stress field becomes more complex, leading to increased deformation and failure of the soft rock roadway. Stress becomes an important factor of mine safety and stability. This paper analyzes the distribution of the regional tectonic field, and determines the distribution of situ stress measurement through measuring the ground stress field in the main mining area level of Puhe Coal Mine using stress relief method. The acquired in situ stress data at different locations and depths provide a reference for the rational arrangement of the stop and mine roadway supporting design, which are of great significance for the efficient safety production of the mine.
Based on Beidou satellite communication platform, sliding force remote monitoring and warning system was widely used in Lingbao Luoshan gold ore, which had achieved remarkable social and economical benefits. However, there is one monitoring point at every 1 000 m2, and their distribution is so discrete that it will no doubt increase construction and operation cost if every monitoring point was installed a Beidou subscriber machine. Therefore, based on Zigbee wireless sensor network technology, network structure and the nodes, embed wireless sensor node in remote monitoring and warning system, a base platform of local wireless sensor network is formed, and it can combine punctiform monitoring information with planar network and transmit concentrated information through Beidou satellite terminal machine; as a result, this largely expands the transmission distance of monitoring data
In this study, the characteristics of geological structure at Qingshui coal mine were analyzed. And the hollow inclusion strain cell overcoring method was used to obtain the in situ stress. The effect of in situ stress on the stability of soft rock roadway was analyzed. The results show that the maximum principal stress is in the horizontal direction with a northeast orientation and has a value of about 1.2–1.9 times larger than gravity; the right side of roadway roof and floor is easily subject to serious deformation and failure, and the in situ stress is found to be a major factor. This paper presents important information for developing countermeasures against the large deformation of the soft rock roadway at Qingshui coal mine.
