The catalytic epoxidation of olefin was investigated on two copper complex-modified molybdenum oxides with a 3D supramolecular structure, [Cu（bipy）]4[Mo15O47].2H2O （1） and [Cu1（bix）][（Cu1bix） （δ-MoVl8O26）0.5] （2） （bipy = 4,4＇-bipyridine, bix = 1,4-bis（imidazole-1-ylmethyl）benzene）. Both compounds were catalytically active and stable for the epoxidation of cyclooctene, 1-octene, and styrene with tert-butyl hydroperoxide （t-BuOOH） as oxidant. The excellent catalytic performance was attributed to the presence of stable coordination bonds between the molybdenum oxide and copper complex, which resulted in the formation of easily accessible Mo species with high electropositivity. In addition, the copper complex also acted as an active site for the activation of t-BuOOH, thus im- proving these copper complex-modified polyoxometalates.
A series of Mo-containing MFI zeolites with different Mo loadings(Mo-MFI-n,n represent the initial Si/Mo molar ratio)was hydrothermally synthesized by using tetrapropylammonium hydroxide as the template and Mo-EDTA complex as the Mo source.Various characterization results demonstrated that the use of the Mo-EDTA complex is beneficial for the incorporation of more Mo species into the MFI-type zeolites.The special complexing capability of EDTA^(2–)plays a critical role in adjusting the release rate of the Mo species to combine with the Si tetrahedron species during the zeolite growth process,thus leading to a uniform distribution of Mo in the MFI framework.In addition,a small portion of extra-framework Mo clusters may be distributed inside the channels or near the pore window of the zeolites.The catalytic properties of these Mo-containing MFI zeolites were evaluated for the epoxidation of cyclohexene with H_(2)O_(2)as the oxidant.The composition-optimized catalyst,Mo-MFI-50,efficiently converted cyclohexene to the corresponding epoxide with a relatively high conversion(93%)and epoxide selectivity(82%)at 75℃after 9 h of reaction.Moreover,the resultant Mo-containing MFI catalyst exhibited excellent structural stability and recoverability and was easily recycled by simple filtration without the need for calcination treatment.
Hybrid composites of phosphomolybdic acid@UiO-66(PMo12@UiO-66)and Co-substituted phosphomolybdic acid@UiO-66(PMo11Co@UiO-66)were synthesized using the direct solvothermal method.A variety of characterization results demonstrated that phosphomolybdic acid(PMo12)or Co-substituted phosphomolybdate acid(PMo11Co)clusters are uniformly dispersed in the cages of Zr-based metal-organic UiO-66 frameworks.The catalytic properties of these hybrid composites were investigated by applying the epoxidation of olefins with tert-butyl hydroperoxide as the oxidant.Compared to PMo12@UiO-66,PMo11Co@UiO-66 showed a much higher catalytic activity and was simply recovered by filtration and reused for at least ten runs without significant loss of catalytic activity.Particularly,PMo11Co@UiO-66 can efficiently convert cyclic olefins like limonenes to epoxides,and its selectivity to 1,2-limonene oxide reached 91%in the presence of a radical inhibitor such as hydroquinone.The excellent catalytic activity and stability of the hybrid composite PMo11Co@UiO-66 are mainly attributed to the uniform distribution of highly active PMo11Co units within the smaller cages of UiO-66,to the suitable surface polarity of the hybrid composite for facilitating the access of reagents and solvent,and to the strong interface-interactions between the polyoxometalate and the UiO-66 framework.
