The transformation method to control waves has received widespread attention in electromagnetism and acoustics. However, this machinery is not directly applicable to the control of elastic waves, because it has been shown that the Navier＇s equation does not usually retain its form under coordinate transformation. In this letter, we prove the form invariance of the Navier＇s equation under the conformal mapping based on the Helmholtz decomposition method. The needed material parameters are provided to manipulate elastic waves. The validity of this approach is confirmed by an active stealth device which can disguise the signal source by changing its position. Experimental verifications and potential applications may be expected in nondestructive testing, structural seismic design and other fields.
In this paper, vibration analysis of irregular-closed-cell foam plates is per- formed. A cell volume distribution coefficient is introduced to modify the original Gibson- Ashby equations of effective Young＇s modulus of foam materials. A Burr distribution is imported to describe the cell volume distribution situation. Three Burr distribution pa- rameters are obtained and related to the cell volume range and the diversity. Based on the plate theory and the effective modulus theory, the natural frequency of foam plates is calculated with the change of the cell volume distribution parameters. The relationship between the frequencies and the cell volumes are derived. The scale factor of the average cell size is introduced and proved to be an important factor to the performance of the foam plate. The result is shown by the existing theory of size effects. It is determined that the cell volume distribution has an impact on the natural frequency of the plate structure based on the cell volume range, the diversity, and the average size, and the impact can lead to optimization of the synthesis procedure.
In this paper, modified two-dimensional peri- odic lattice materials with local resonance phononic band gaps are designed and investigated. The design concept is to introduce some auxiliary structures into conventional pe- riodic lattice materials. Elastic wave propagation in this kind of modified two-dimensional lattice materials is studied us- ing a combination of Bloch＇s theorem with finite element method. The calculated frequency band structures of illus- trative modified square lattice materials reveal the existence of frequency band gaps in the low frequency region due to the introduction of the auxiliary structures. The mechanism underlying the occurrence of these frequency band gaps is thoroughly discussed and natural resonances of the auxiliary structures are validated to be the origin. The effect of geo- metric parameters of the auxiliary structures on the width of the local resonance phononic band gaps is explored. Finally, a conceptual broadband vibration-insulating structure based on the modified lattice materials is designed and its capabil- ity is demonstrated. The present work is anticipated to be useful in designing structures which can insulate mechanical vibrations within desired frequency ranges.
