Radiation damage in 4H-SiC samples implanted by 70 keV oxygen ion beams was studied using photoluminescence and electron spin resonance techniques. ESR peak of g = 2.0053 and two zero-phonon lines were observed with the implanted samples. Combined with theoretical calculations, we found that the main defect in the implanted 4H-Si C samples was oxygen-vacancy complex. The calculated defect formation energies showed that the oxygen-vacancy centers were stable in n-type 4H-Si C.Moreover, the V_(Si)O_C^0 and V_(Si)O_C^(-1) centers were optically addressable. The results suggest promising spin coherence properties for quantum information science.
Related referential studies on gas-solid two-phase flows were briefly reviewed. Bubble ascending in a two-dimensional （2D） gas-solid fluidized bed was studied both experimentally and numerically. A modified continuum model expressed in the conservation form was used in numerical simulation. Solid-phase pressure was modeled via local sound speed; gas-phase turbulence was described by the K-ε two-equation model. The modified implicit multiphase formulation （IMF） scheme was used to solve the model equations in 2D Cartesian/cylindrical coordinates. The bubble ascending velocity and particle motion in the 2D fluidized bed were measured using the photochromic dye activation （PDA） technique, which was based on UV light activation of particles impregnated with the dye. Effects of bed height and superficial gas velocity on bubble formation and ascent were investigated numerically. The numerically obtained bubble ascending velocities were compared with experimental measurements. Gas bubble in jetting gas-solids fluidized bed was also simulated numerically.
Ruoyu HongZhiqiang RenJianmin DingM. KawajiHongzhong Li
Two-layer flow of magnetic fluid and non-magnetic silicone oil was simulated numerically. The continuity equation, momentum equations, kinematic equation, and magnetic potential equation were solved in two-dimensional Cartesian coordinate. PLIC （piecewise linear integration calculation） VOF （volume of fluid） scheme was employed to track the free interface. Surface tension was treated via a continuous surface force （CSF） model that ensures robustness and accuracy. The influences of applied magnetic field, inlet velocity profile, initial surface disturbance of interface and surface tension were analyzed. The computed interface shapes at different conditions were compared with experimental observation.
Ruoyu HongZhiqiang RenShizhong ZhangJianmin DingHongzhong Li
The Ni-modified TiO2 was synthesized using two methods including co-precipitation(Ni doped TiO2, Ni-TiO2) and wet impregnation(Ni loaded TiO2, Ni/TiO2). The surface and bulk crystalline phases of Ni-modified TiO2 were investigated by using X-ray diffractometry(XRD), UV Raman spectroscopy, TEM, and SEM. It is observed that Ni doping can promote the phase transition and grain size growth of TiO2. Moreover, the propagation of the rutile phase from the bulk into the surface region of TiO2 is increased when the Ni doping amount reaches up to 3%. However, in Ni/TiO2, it is found out that the surface and bulk phase transformation of TiO2 can be inhibited after impregnation of 1% of Ni on the TiO2. Compared with the co-precipitation method, Ni species may be more enriched in the surface of the Ni/TiO2 sample upon adoption of the impregnation method, and the direct contact of anatase particles of TiO2 is avoided. As a consequence, the phase transition in the surface and bulk region of TiO2 can be effectively inhibited by Ni loading. Additionally, the activity of the photocatalytic degradation of RhB on the 3Ni-TiO2-600 ℃ sample is higher than that on the 3 Ni/TiO2-600 ℃ sample. The phase junction formed between anatase and rutile in the surface region of 3Ni-TiO2-600 ℃ may the main reason for its high photocatalytic activity.
Wang YanZhang JingLiu ShiyangYan SongWu WeichengXu QianLi Can
