The nonlinear properties of lattice network-based（LNB） composite right-/left-handed transmission lines（CRLH TLs）with nonlinear capacitors are experimentally investigated.Harmonic generation,subharmonic generation,and parametric excitation are clearly observed in an unbalanced LNB CRLH TL separately.While the balanced design of the novel nonlinear TL shows that the subharmonic generation and parametric processes can be suppressed,and almost the same power level of the higher harmonics can be achieved over a wide bandwidth range,which are difficult to find in conventional CRLH TLs.
We present several design examples of how to apply transformation optics and curved space under coordinate transformation to manipulating the surface plasmon waves in a controlled manner.We demonstrate in detail the design procedure of the plasmonic wave squeezer,in-plane bend and omnidirectional absorber.We show that the approximation method of modifying only the dielectric material of a dielectric-metal surface of the plasmonic device could lead to acceptable performance,which facilitates the fabrication of the device.The functionality of the proposed plasmonic device is verified using three-dimensional full-wave electromagnetic simulations.Aiming at practical realization,we also show the design of a plasmonic in-plane bend and omnidirectional absorber by an alternative transformation scheme,which results in a simple device structure with a tapered isotropic dielectric cladding layer on the top of the metal surface that can be fabricated with existing nanotechnology.
A frequency selective polarization rotator that can rotate the polarization angle of an incident electromagnetic wave at the microwave frequency by 45 is presented. The polarization rotator is based on a two-dimensional periodic array of substrate integrated waveguide cavities, realizing the polarization rotation by coupling the input signal to the output wave through three metallic slots. Two layers of frequency selective surfaces are cascaded by substrate and form the polarization rotator. A vertical slot on the top layer is used to select the horizontal polarization from the incident wave, the vertical and the horizontal slots on the bottom layer are, respectively, used to obtain horizontally and vertically polarized outgoing waves. The two orthogonal outgoing waves are combined to result in the 45~ polarized wave. Both full wave simulation and experimental measurement are carried out, together validating the proposed method.
A periodic layered medium, with unit cells consisting of a dielectric and an electromagnetically-induced transparency （EIT）-based atomic vapor, is designed for light propagation manipulation. Considering that a destructive quantum interference relevant to a two-photon resonance emerges in EIT-based atoms interacting with both control and probe fields, an EIT-based periodic layered medium exhibits a flexible frequency-sensitive optical response, where a very small variation in the probe frequency can lead to a drastic variation in reflectance and transmittance. The present EIT-based periodic layered structure can result in controllable optical processes that depend sensitively on the external control field. The tunable and sensitive optical response induced by the quantum interference of a multi-level atomic system can be applied in the fabrication of new photonic and quantum optical devices. This material will also open a good perspective for the application of such designs in several new fields, including photonic microcircuits or integrated optical circuits.
