The temperature dependence of the photoluminescence（PL） from Mn S/Zn S core–shell quantum dots is investigated in a temperature range of 8 K–300 K. The orange emission from the ^4T1→^6A1transition of Mn^2＋ions and the blue emission related to the trapped surface state are observed in the Mn S/Zn S core–shell quantum dots. As the temperature increases, the orange emission is shifted toward a shorter wavelength while the blue emission is shifted towards the longer wavelength. Both the orange and blue emissions reduce their intensities with the increase of temperature but the blue emission is quenched faster. The temperature-dependent luminescence intensities of the two emissions are well explained by the thermal quenching theory.
It has already been found that the round shape of holes can be changed into hexagonal shape during plasma etching processes.This work aims to understand the mechanism behind such a shape change using particle simulation method.The distribution of electric field produced by electrons was calculated for different heights from the mask surface.It is found that the field strength reaches its maximum around a hole edge and becomes the weakest between two holes. The field strength is weakened as moving away from the surface.The spatial distribution of this electric field shows obvious hexagonal shape around a hole edge at some distances from the surface. This charging distribution then affects the trajectories of ions that fall on a mask surface so that the round hole edge is etched to become a hexagonal hole edge.The changing of this hole shape will again alter the spatial distribution of electric field to enhance the charging effect dynamically.
Thin oxidized copper films in various thickness values are deposited onto quartz glass substrates by electron beam evaporation. The ellipsometry parameters and transmittance in a wavelength range of 300 nm-1000 nm are collected by a spectroscopic ellipsometer and a spectrophotometer respectively. The effective thickness and optical constants, i.e., refractive index n and extinction coefficient k, are accurately determined by using newly developed ellipsometry combined with transmittance iteration method. It is found that the effective thickness determined by this method is close to the physical thickness and has obvious difference from the mass thickness for very thin film due to variable density of film. Furthermore, the thickness dependence of optical constants of thin oxidized Cu films is analyzed.
