tn order to know the effect of substituting La with Nd on the electrochemical properties of the La-Mg--Ni syst...
Wei Xiong~(a,b,□) Huizhong Yan~(a,c) Fanqing Kong~a Baoquan Li~a Jin Li~a Yanghuan Zhang~b a.Baotou Research Institute of Rare Earth,Baotou 014030,PR China
In order to investigate the effect of substituting La with Pr on structural and hydrogen storage properties of La-Mg-Ni system （AB3.5-type） hydrogen storage alloys, a series of La0.65-xPrxNd0.12Mg0.23Ni3.4Al0.1（x=0, 0.10, 0.15, 0.2） hydrogen storage alloys were prepared. X-ray diffraction （XRD）, scanning electron microscopy （SEM） and energy dispersive spectrometer （EDS） analyses revealed that two alloys （x=0.0 and 0.10） were composed of （La,Mg）2（Ni,Al）7 phase, La（Ni,A1）5 phase and （La,Mg）Ni2 phase, while other alloys （x=0.15 and 0.20） consisted of （La,Mg）2（Ni,A1）7 phase, La（Ni,A1）5 phase, （La,Mg）Ni2 phase and （La,Mg）（Ni,A1）3 phase. All alloys showed, however, only one pressure plateau in P-C isotherms. The Pr/La ratio in alloy composition influenced hydrogen storage capacity and kinetics properties. Electrochemical studies showed that the discharge capacity decreased from 360 mAh/g （x=-0.00） to 335 mAh/g （x=-0.20） as x increased. But the high-rate dischargeability （HRD） of alloy electrodes increased from 26% （x=0.00） to 56% （x=-0.20） at a discharge current density of Id=1800 mA/g. Anode polarization measurements were done to further understand the electrochemical kinetics properties after Pr substitution.
In this paper, any two of the three anticorrosion agents, that is emulsifier (OP-10), soluble glass (Na2O·nSiO2) and glycerin (C3H8O3), were treated simultaneously on the surface of amorphous (a- ) MgNi + 5% Ml2Mg17(MI denotes the lanthanum-rich mish metal) electrode and the electrolyte. Effect of the synergistic anticorrosion treatment on charging/discharging cycle stability of the electrode was investigated. Contrasted with single treatment method, the cycling stability of the electrodes was further improved. The desirable synergistic anticorrosion method was that the electrode was treated by the soluble glass, and that OP-10 was added into the electrolyte. The cyclic voltammogram (CV) results of the electrode show clearly that the anticorrosion agent can change the electrochemical activity and mechanism of the electrode. The concentration of the anticorrosion agent in the electrolyte treated by the synergistic anticorrosion method was also investigated. The appropriate concentration of the anticorrosion agents in the electrolyte is 0.143% .
